Filter
Top Products
TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Choose menu “Advanced Setup”Æ“MAC Clone”, you can configure the MAC address of the
WAN Interface as shown below.
The WAN Interface List displays the Lay2 Interfaces you have configured on the section 4.4.1
Layer2 Interface
and its default MAC Address. If you have not configured corresponding WAN
Service for the interface on the section 4.4.2 WAN Service, the blank for MAC Address will display
“Need a corresponding WAN Service”.
The last one of WAN Interface List displays your PC’s current address.
Figure 4-24
Type the new value for the WAN Interface who’s MAC Address you want to change.
You can select corresponding WAN Interface from the drop-down list and click Clone button to
clone your current PC MAC.
Click Restore Default button to restore the WAN Interface’s default MAC Address.
)
Note:
Only the WAN Ports can use MAC Address Clone function. All the clone MAC addresses must not
be the same with each other.
4.4.5 LAN
Choose “Advanced Setup”Æ“LAN”, and you will see the LAN screen including IPv4 LAN Config
and IPv6 LAN Config. The section allows you to configure the modem router’s LAN ports settings.
4.4.5.1 IPv4 LAN Config
Choose “Advanced Setup”Æ“LAN” Æ“IPv4LAN Config”, and you will see the LAN screen
(shown in Figure 4-25), here you can configure LAN IPv4interface for your modem router.
31