Filter
Top Products
TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Choose “Advanced Setup”Æ“Multicast”, you can configure the IGMP protocol on the screen.
Figure 4-68
Click Apply/Save to save your settings.
4.5 IPTV
Choose “IPTV”, and you will see the screen as shown in Figure 4-69.
Figure 4-69
¾ Enable IPTV: Check this box to enable IPTV. If this checkbox is selected, please set the
following parameters as shown in the figure below. Make sure the following settings are
correct.
¾ VPI (0~255): Identifies the virtual path between endpoints in an ATM network. The valid range
is from 0 to 255. Please input the value provided by your ISP.
¾ VCI (1~65535): Identifies the virtual channel endpoints in an ATM network. The valid range is
from 1 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value
provided by your ISP.
Click the Save/Apply button to save your settings.
61