Filter
Top Products
TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
¾ Beacon Interval: Enter a value between 20-1000 milliseconds. The Beacon Interval value
indicates the frequency interval of the beacon. A beacon is a packet broadcast by the modem
router to synchronize the wireless network. The default value is 100.
¾ Transmit Power: This option will allow you to configure the wireless transmit power. High
transmit power will extend the wireless signal range of the device and make the signal
transmit more legible. Low transmit power with the smaller wireless signal range that will
decrease the probability of interrupt by other Wi-Fi device.
¾ WMM (Wi-Fi Multimedia): This function can guarantee the packets with high-priority
messages being transmitted preferentially. It is strongly recommended.
4.6.7 Station info
Choose “Wireless”Æ” Station Info”, you will see the screen of Wireless--Authenticated
Stations setting shown as below.
Figure 4-100
This page shows authenticated wireless stations and their status.
¾ MAC: Displays the connected wireless station's MAC address.
¾ Associated: Displays whether the wireless station has associated with the access point.
¾ Authorized: Displays the information of Authentication.
¾ SSID: Displays the connected wireless station's SSID.
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
4.7 Guest Network
There are two submenus under the Guest Network menu: Basic and Station list. Click any of
them, and you will be able to scan or configure the corresponding function. The detailed
explanations for each submenu are provided below.
4.7.1 Basic
Choose menu “Guest Network”Æ“Basic”, and you will see the screen as shown in Figure 4-101.
This feature allows you to create a separate network for your guests without allowing them to
access your main network and the computers connected to it.
81