Filter
Top Products
TD-W8968 300Mbps Wireless N USB ADSL2+ Modem Router User Guide
• Leased Time (hour): The Leased Time is the amount of time in which a network user will
be allowed connection to the modem router with their current dynamic IP address. Enter
the amount of time, in hours, then the user will be “leased” this dynamic IP address. After
the dynamic IP address has expired, the user will be automatically assigned a new
dynamic IP address. The default is 24 hours.
¾ Static IP Lease List: The function allows you to specify a reserved IP address for a PC on the
LAN, that PC will always obtain the assigned IP address each time when it accesses the
DHCP server. Reserved IP addresses should be assigned to servers that require permanent
IP settings. Click the Add button in Figure 4-25, and then you will set the rule in the screen as
below.
Figure 4-26
• MAC Address: The MAC address of the computer on the LAN which you want to reserve
an IP.
• IP Address: The IP address you want to reserved to the computer.
¾ Configure the second IP Address and Subnet Mask: You can configure the modem
router’s second IP Address and Subnet Mask for LAN Interface through which you can also
access to the Web-based Utility as the default IP Address and Subnet Mask.
4.4.5.2 IPv6 LAN Config
Choose “Advanced Setup”Æ“LAN” Æ“IPv6 LAN Config”, and you will see the LAN screen
(shown in Figure 4-27), here you can configure LAN IPv6 interface for your modem router.
33