Filter
Top Products
92
93
Section 15. Viewing Statistics
This section describes how to view and manage device statistics for interfaces, GVRP, EAP, and Etherlike and how to view
and dene as RMON statistics, history and alarms.
This section contains the following topics:
Viewing Interface Statistics
Managing RMON Statistics
15.1 Viewing Interface Statistics
This section contains the following topics:
Viewing Device Interface Statistics
Viewing Etherlike Statistics
Viewing GVRP Statistics
Viewing EAP Statistics
15.1.1 Viewing Device Interface Statistics
The Interface Statistics Page contains statistics for both received and transmitted packets.
To view interface statistics:
1. Click System > Statistics > Interface Statistics. The Interface Statistics Page opens:
Figure 132: Interface Statistics Page
The Interface Statistics Page contains the following elds:
Interface — Indicates the device for which statistics
are displayed. The possible eld values are:
– Port — Denes the specic port for which interface
statistics are displayed.
– LAG — Denes the specic LAG for which interface
statistics are displayed.
Refresh Rate — Defines the amount of time that
passes before the interface statistics are refreshed.
The possible eld values are:
– 15 Sec —Indicates that the Interface statistics are
refreshed every 15 seconds.
– 30 Sec —Indicates that the Interface statistics are refreshed every 30 seconds.
– 60 Sec —Indicates that the Interface statistics are refreshed every 60 seconds.
– No Refresh —Indicates that the Interface statistics are not refreshed.
Receive Statistics
Total Bytes (Octets) — Displays the number of octets received on the selected interface.
Unicast Packets — Displays the number of Unicast packets received on the selected interface.
Multicast Packets — Displays the number of Multicast packets received on the selected interface.
Broadcast Packets — Displays the number of Broadcast packets received on the selected interface.