TP-Link TL-SL3428 Switch User Manual


  Open as PDF
of 120
 
38
39
Section 6. Dening IP Addresses
This section provides information for dening IP addresses on the device using DHCP and ARP. In addition, this section
contains parameters for dening device default gateways, and Domain Name Servers.
This section contains the following topics:
Dening IP Addressing
Dening Domain Name System
6.1 Dening IP Addressing
This section provides information for assigning interface and default gateway IP addresses, and dening ARP and DHCP
parameters for the interfaces.
This section contains the following topics:
Dening IP Addresses
Dening the Default Gateway
Dening DHCP Addresses
Dening ARP
6.1.1 Dening IP Addresses
The IP Interface Page contains elds for assigning IP addresses. Packets are forwarded to the default IP when frames are
sent to a remote network. The congured IP address must belong to the same IP address subnet of one of the IP interfaces.
1. Click System > System Info > IP Conguration > IP Addressing. The IP Interface Page opens:
Figure 53: IP Interface Page
The IP Interface Page contains the following elds:
IP Address — Displays the currently configured IP
address.
Mask — Displays the currently congured IP address
mask.
Interface — Displays the interface used to manage the
device.
Dynamic — Indicates that the IP address is
dynamically created.
Static — Indicates the IP address is a static IP address.
Remove — Removes the selected IP address from the interface. The possible eld values are:
– Checked — Removes the IP address from the interface.
– Unchecked — Maintains the IP address assigned to the Interface.
2. Click . The Add IP Interface Page opens:
 previous next