8
9
Section 2. Dening Device Information
This section contains information for viewing and setting general system information.
The System Description Page contains parameters for conguring general device information, including the system name,
location, and contact, the system MAC Address, System Object ID, System Up Time, System IP and MAC addresses, and
both software and hardware versions.
To view and dene the system description:
1. Click System Info > General > Description. The System Description Page opens:
Figure 10:System Description Page
The System Description Page contains the following elds:
Model Name — Displays the device model number
and name.
System Name — Defines the user-defined device
name. The eld range is 0-160 characters.
System Location — Defines the location where the
system is currently running. The field range is 0-160
characters.
System Contact — Denes the name of the contact
person. The eld range is 0-160 characters.
System Object ID — Displays the vendor’s authoritative identication of the network management sub-system contained
in the entity.
System Up Time — Displays the amount of time since the most recent device reset. The system time is displayed in the
following format: Days, Hours, Minutes, and Seconds. For example, 41 days, 2 hours, 22 min-utes and 15 seconds.
Base MAC Address — Displays the device MAC address.
Hardware Version — Displays the installed device hardware version number.
Software Version — Displays the installed software version number.
Boot Version — Displays the current boot version running on the device.
2. Dene the System Name, System Location and System Contact elds.
3. Click . The system description is saved and the device is updated.