Filter
Top Products
Management
Trango Broadband Wireless — Access5830 User Manual Rev. F page 49
Switches: Checked means active.
Block Broadcast and multicast packets: Block these types of Ethernet packets when active. ARP and DHCP packets will be
passed regardless of this setting.
Auto Scan AP: Will scan all channels and polarization in search of an AP.
TCP/IP Service for AP: Allows TCP/IP access into the SU via the RF link when the SU is in Opmode "SU."
TCP/IP Service for Ethernet port (Opmode “SU”): Allows TCP/IP access into the SU via the Ethernet port when the SU is
in Opmode "SU."
Scan AP Sequence: The set of channels and antenna polarizations the SU will automatically scan while it searches for an AP.
Remarks: A descriptive text field for general use (i.e. the location of the unit). It does not affect system performance.
Save and Activate Settings: Saves to memory any settings that were altered. These settings are then activated. Note: All
changed settings will revert to previous values after reboot/power cycle if Save and Activate is not selected.
Activate Opmode: Activates radio's Opmode to "SU," which means it is transmitting. To turn a radio to Opmode "OFF," see
Default Opmode.
Reboot System: Reboots the system. Make sure all settings have been saved first.