Filter
Top Products
Management
Trango Broadband Wireless — Access5830 User Manual Rev. F page 53
Link Control Page
SU Association Status: Shows SU ID
numbers and status of SUs. Power Off is
equivalent to Not Associated.
RF Link Loopback Test: This is the built-
in performance test. Specify a SU ID and
time in minutes to conduct the test. The test
is prioritized, so it will take precedence over
all other traffic. 1600 byte packets are sent
and received between the SU and AP at 50
millisecond intervals over the time specified.
The success rate and number of bytes is
reported.
SU Ranging/RSSI Test: Reports the
distance for specified SU from the AP in
miles, and the received signal strength for
uplink and downlink.
Power Level all SUs: Adjusts the transmit
power of all SUs to attempt to bring the AP’s
received signal strength as close as possible
to the Target RSSI. Use the Advanced Setup
page to adjust the Target RSSI.