Filter
Top Products
Management
Trango Broadband Wireless — Access5830 User Manual Rev. F page 62
LO stability: .00025% PLL stabilized (+/-2.5ppm) over temperature range
Data Input Section
Data Rate (User): Up to 10 MBPS Sustained throughput
Format: 10/100 BaseT IEEE 802.3 Ethernet compliant
Ethernet packet: Up to 1600 byte long packets
Power
Input Voltage: Input voltage range at unit is 10.5 VDC to 28 VDC max
Power is supplied over Ethernet cable using junction box provided, with up to 300 feet of 24 AWG STP cable.
Current Cons.: 575 mA in transmit mode at max power using 24 V standard adapter (11.5W)
500 mA in receive mode using 20 V standard adapter (10 W)
Data Output Section
Data Rate (User): 10 MBPS Maximum sustained throughput
Format: 10/100 BaseT IEEE 802.3 Ethernet compliant
Ethernet Protocols: TCP/IP, Telnet, TFTP, UDP, and HTTP
Physical Interfaces
Serial Interface: Shielded RJ11 connector
LAN Interface: Shielded RJ45 connector
Power: Carried on 4 unused pins of Ethernet cable
Mechanical and Environmental
General
Material: Powdercoated Aluminum base with polycarbonate radome
Size: 12.5”x5”x8” including mounting studs
Weight: 4 lbs
Mounting: Pole mounting hardware provided
Environmental
Operating Temp: -40° - 60° C
Storage: -40° - 85° C
Humidity: 100 % when sealed properly
NEMA Rating: NEMA 4
Shock: Sustain 3 axis drop from 5 feet
Standard Power Supply
24 Volt DC Power adapter and J-Box supplied with product.
Type: Linear wall mount transformer
Input: 120 VAC
Output: 24 VDC +/- 1 V
Max current: 1200 mA
FCC Compliance:
The transceiver shall comply with the following regulations:
FCC 15.247 Spread Spectrum transmitter
FCC 15.407(2) UNII Band 2 transmitter
Part 15 Subpart B
Class B Digital device verification
Part 15 Subpart C
FCC 15.203 Antenna connection requirement – non-standard connection
FCC 15.209 Unwanted emissions below 1GHz