Filter
Top Products
14
Table 2. Local Mode Programming Function Codes and Default Settings
24 RS232 Port 0 Word Length User defined Used to change the word length, 7 or 8 bits,
of the data at Port 0.
25 RS232 Port 0 Prefix None Used to place a prefix before the packet of
data before it is sent out of the keyboard
Main Port. (This function is inactive if Port
0 is the main port.)
26 RS232 Port 0 Suffix <CR> (0Dh) Used to place a suffix after the packet of
data before it is sent out of the keyboard
Main Port. (This function is inactive if Port
0 is the main port.)
30 RS232 Port 1 Baud Rate 9600 Baud
Rate
Used to select a baud rate for Port 1. Baud
rates available are: 300, 600, 1200, 2400,
4800, 9600, 19200, 38400 and 57600.
31 RS232 Port 1 Stop Bits 2 stop bits Used to select number of stop bits, 1 or 2,
used with Port 1.
32 RS232 Port 1 Parity No parity
Used to select parity used with Port 1.
Selections available are: no parity, odd
parity or even parity.
33 RS232 Port 1 Handshaking Both Used to select method of handshaking used
with Port 1. Selections available are: none,
CTS/RTS, XON/XOFF or both.
34 RS232 Port 1 Word Length User defined Used to change the word length, 7 or 8 bits,
of the data at Port 1.
35 RS232 Port 1 Prefix None Used to place a prefix before the packet of
data before it is sent out of the keyboard
Main Port.
36 RS232 Port 1 Suffix <CR> (0Dh) Used to place a suffix after the packet of
data before it is sent out of the keyboard
Main Port.
38 Keyswitch Position 1 MAKE No output Used to program the MAKE codes of the
keyswitch. When the key is turned into
position 1, the switch can send macros
and/or perform an internal secure (lock).
39 Keyswitch Position 1 BREAK No output Used to program the BREAK codes of
the keyswitch. When the key is turned
out of position 1, the switch can send
macros and/or perform an internal
secure (lock).
40 Keyswitch Position 2 MAKE No output Used to program the MAKE codes of
the keyswitch. When the key is turned
into position 2, the switch can send
macros and/or perform an internal