Filter
Top Products
16
Table 2. Local Mode Programming Function Codes and Default Settings
71 Enable/Disable Key Clicks On Enables or disables audible key clicks.
0 = off; 1 = on
80 Define Left Shift Key Key 44
See
illustration in
Appendix D
If auxiliary keyboard connected to the Series
500 Keyboard is other than a standard 101 or
102- key keyboard, used to define where the
AUX keyboard SHIFT keys are located. Refer
to Appendix D.
81 Define Right Shift Key
Key 57 See
illustration in
Appendix D
Same as Function Code 80 above.
82 Define Left Control Key Key 58
See
illustration in
Appendix D
If auxiliary keyboard connected to the Series
500 Keyboard is other than a standard 101 or
102-key keyboard, used to define where the
AUX keyboard CONTROL keys are located.
Refer to Appendix D.
83 Define Right Control Key Key 64
See
illustration in
Appendix D
Same as Function Code 82 above.
84 Define Left Alternate Key Key 60
See
illustration in
Appendix D
If auxiliary keyboard connected to the Series
500 Keyboard is other than a standard 101 or
102-key keyboard, used to define where the
AUX keyboard ALTERNATE keys are located.
Refer to Appendix D.
85 Define Right Alternate Key Key 62
See
illustration in
Appendix D
Same as Function Code 84 above.
86 Programming Mode Enter Macro None Reserved for future use.
87 Lock Mode Enter Macro None Reserved for future use.
90 Send System Log None Used to read the Series 500 Keyboard system
log at the main port. For detailed information
about retrieving the system log data, refer to
the Maintenance Section of this manual.
91 Main Port Select Port 0 Used to select either the main keyboard port
or main RS232 port as the main
communications port.
96
Set Secure Mode None Used to toggle between secure or unsecure
mode.
97 Default Keyboard None
Used to reset Series 500 Keyboard to all
programmed default settings.
98 Download Keyboard None Once a Series 500 Keyboard has been
programmed, the parameters can be copied
(cloned) from the source keyboard to other
keyboards. This feature saves time and
reduces errors when programming more than