29
Table 3. Local Mode Programming Instructions - Continued
Note: *Default Settings
Function Code(s) Operation Normal Indication Remarks
70
Indicator LED
Mode (70)
1. While in programming mode, at Series 500 Keyboard numeric keypad, enter Function
Code 70.
LED (2) turns on.
2. At Series 500 Keyboard numeric keypad, enter the applicable number (0 or 1) to
select LED mode of operation.
LED Mode
0 = Command mode of operation*
1 = PC mode of operation
LED (2) turns off.
3. Program the next function code or exit programming mode by entering 99 on Series
500 Keyboard numeric keypad or by swiping the Programmer's card. If using the
optional 3-position keyswitch, move switch out of the AUX position.
71
Enable/Disable
Keyboard Key
Clicks (71)
1. While in programming mode, at Series 500 Keyboard numeric keypad, enter Function
Code 71.
LED (2) turns on.
2. At Series 500 Keyboard numeric keypad, enter the applicable number (0 or 1) to
select key click mode of operation.
Key Click Mode
0 = off
1 = on*
LED (2) turns off.
3. Program the next function code or exit programming mode by entering 99 on Series
500 Keyboard numeric keypad or by swiping the Programmer's card. If using the
optional 3-position keyswitch, move switch out of the AUX position.