Filter
Top Products
15
Table 2. Local Mode Programming Function Codes and Default Settings
secure (lock).
41 Keyswitch Position 2 BREAK No output Used to program the BREAK codes of
the keyswitch. When the key is turned
out of position 2, the switch can send
macros and/or perform an internal
secure (lock).
42 Keyswitch Position 3 MAKE No output Used to program the MAKE codes of
the keyswitch. When the key is turned
into position 3, the switch can send
macros and/or perform an internal
secure (lock).
43 Keyswitch Position 3 BREAK No output Used to program the BREAK codes of
the keyswitch. When the key is turned
out of position 3, the switch can send
macros and/or perform an internal
secure (lock).
44 Keyswitch Polling User
defined
Allows the user to poll for keyswitch
1,2, or 3 MAKE/BREAK codes. Two
options are available: 0 = unsolicited
mode in which codes are sent
whenever the keyswitch is rotated, or 1
= solicited mode in which codes are
sent only when a B7 command is
executed.
45 Drawer 1 Open D1+
(44h,31h,2B
h)
Used to set up a unique sequence of
keys so host computer can determine if
drawer 1 is open or closed.
46 Drawer 1 Closed D1-
(44h,31h,2D
h)
Used to set up a unique sequence of
keys so host computer can determine if
drawer 1 is open or closed.
47 Drawer 2 Open D2+
(44h,32h,2B
h)
Used to set up a unique sequence of
keys so host computer can determine if
drawer 2 is open or closed.
48 Drawer 2 Closed D2-
(44h,32h,2D
h)
Used to set up a unique sequence of
keys so host computer can determine if
drawer 2 is open or closed.
49 Poll/Unsolicited Cash Drawer Status Unsolicited Allows the user to poll for cash drawer status,
instead of sending it each time it changes
state, open or closed. Two options are
available: Send on change or transition, or
send only with poll command CDCONT.
70 Indicator Lights Mode Command
mode of
operation
Used to select if the CAPS (2) and NUM (3)
LOCK indicators function in the same manner
as a PC. Two options are available: PC mode
or Command mode (Lights Command). Note
that in the PC mode control of the indicators
will be transferred to other higher priority
commands if applied.