Filter
Top Products
ON. In Search mode, with I-CALL ON, you
will hear both talkgroup calls and I-CALLs.
You can also set I-CALLs to I-CALL ONLY
during which you will monitor only I-CALLs in
Search mode. You can also program I-CALL
IDs into Scan List memory.
OR
8:ID SCAN LIST (LTR)
When scanning an LTR system you can only
turn Scan Lists OFF and ON when an LTR
talk group that you have entered into memory
is active. To provide you with another method
to turn Scan Lists ON and OFF, you can use
this Menu item which only appears when you
have selected LTR in trunk type.
9:EMERGENCY ALT (EDACS)
In EDACS trunked systems, you can set an
alert for an EDACS transmission received.
Set Emergency Alert to ON, EMERGENCY
flashes on the display and you will hear beep
alerts when you receive an EDACS
emergency transmission.
9:STATUS BIT (MOTOROLA)
On Type 2 trunking systems there is a
method by which specialized types of
communications utilize unique talkgroup
numbers. An emergency call will occur on
a unique talkgroup from its primary
assignment, for example. Because the
BC250D defaults to Status-Bit ON mode, you
never need to worry about missing these
transmissions. If you've programmed
talkgroup 33264 into Scan List memory, for
example, and there is an emergency call
within the group, you will hear it on 33264.
0:EDACS ID FORM (EDACS)
You can change to display the talkgroups in
decimal mode, but this mode does not
provide you with the flexibility that you get
with AFS. The BC250D defaults to show the
talkgroup number in AFS mode (Agency-
Fleet-Subfleet). For details on AFS see pages
65~67.
OR
0:END CODE (MOTOROLA)
When this function is disabled, the radio looks
for squelch before returning to the control
channel instead of waiting for the disconnect
23
BC250D 11/6/2 11:36 AM Page 23