Filter
Top Products
26
Programming
Before the BC250D can begin conventional scanning, you
must program a frequency into at least one channel.
Repeat this procedure for each channel you want to program.
Storing Frequencies into Channels in Menu
Mode
1. Select frequencies you received
from your dealer, from various
sources on the internet, or from
one of the guides listed on
page 11.
Here is a list of sample
frequencies you should try:
156.800 Marine Calling channel
155.340 Ambulance operations
155.280 Ambulance operations
155.160 Ambulance operations
462.950 Ambulance operations
462.5625 Family Radio Services (channel one)
2. Press MENU/BACK.
3. Select 2:SCAN OPTION / 1:CONVENTIONAL by
rotating the VFO and pressing E.
4. Select a channel.
a. Enter the
channel number
using the keypad.
b. Then press E.
5. Select 1:FREQUENCY, and press E.
a. Enter the frequency number
using (decimal key) and the
keypad.
b. Then press E.
6. Enter the alpha tag and press E.
(See page 28.)
7. The following display appears, select
the location you want.
.
HOLD/
MAN
SEARCH
SCAN
SERVICE
CH/
FRQ
MENU/BACK
L/O
.
SELECT
REVERSE
TRUNK
RSM
E
C 001
1:FREQUENCY
2:DELAY
3:TONE DATA
C 001
855.0000 NFM
ALPHA TAG
¡
1:OTHER CHANNEL
2:CHANNEL OPTION
3:DONE
C 001
0000.0000 NFM
FREQUENCY
BC250D 11/6/2 11:36 AM Page 26