Filter
Top Products
[ 7 ]
Cleaning the battery charging contacts
To maintain a good charge, it is important to clean the charging
contacts on both the handset and the base unit once a month.
Use a dry cloth or pencil eraser to clean.
Low battery alert
When the batteries are very low and need to be charged, the phone is programmed to eliminate functions in order to save power.
The batteries need to be charged when:
- The empty battery icon appears.
- “Low Battery” appears in the display.
If the phone is in the standby mode, none of keys will operate. If you are on a call,
complete your conversation as quickly as possible, and return the handset to the cradle.
Low Battery
contacts
INSTALLING THE BELTCLIP
To attach the beltclip
Insert the beltclip into the holes on each side of the handset. Press down until it clicks into place.
To remove the beltclip
Pull both sides of the beltclip to release the tabs from the holes.
Battery replacement and handling
When the operating time becomes short, even after a battery is
recharged, please replace the battery.
Please use only “AA” rechargeable Ni-MH batteries.
Caution
• Use only “AA” rechargeable Ni-MH batteries.
• Do not remove the batteries from the handset to charge them.
• Never throw the batteries into a fire, disassemble them, or heat them.
• Do not remove or damage the battery casing.
To avoid the risk of personal injury or property damage from fire or electrical shock, only use the
Uniden adapter model specifically designated for this product, and “AA” rechargeable Ni-MH batteries.
UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM Page 7