[ 51 ]
• The voice memo messages are recorded as an incoming messages.
• When the answering system is full, “” appears on the display and recording is terminated.
• If an outside call is received during the operation, the operation is canceled.
Voice memo
The voice memo function allows the user to record messages (more than 2 seconds and
within 4 minutes).
1) Press and hold . You hear a beep.
2) Start your recording after the announcement “Record Memo Message” and a
confirmation tone. The message counter displays “”.
3) When you have finished, press , , or to stop recording.
The system returns to standby.
• A recorded conversation is treated as an incoming message and will be added to the
stored messages.
• You cannot record 3-way or intercom conversations.
• When the answering system becomes full, “” appears on the display and recording
is terminated.
Recording a conversation
You can record a conversation from the handset or the base (more than 2 seconds and
within 10 minutes).
From the handset
1) During a conversation, press the MENU soft key on the handset.
2) Press /
▲ or ▼ to select “Recording”, then press the OK soft key.
appears on the handset, and “” flashes on the base.
A tone, that can be heard by both parties, sounds during recording.
3) Press the STOP soft key to finish recording. You will hear a confirmation tone.
From the base
1) During a conversation using the base speaker phone, press and hold on
the base until you hear a confirmation tone. The unit begins recording and “”
flashes on the display.
A tone, that can be heard by both parties, sounds during recording.
2) To stop recording, press or . You hear a confirmation tone.
UP308BH (DSS2465) ENG OM 1/14/05 11:48 AM Page 51