Filter
Top Products
[ iv ]
3) Securely close the battery compartment cover by sliding it up
until it snaps into place.
Charging the handset
1) Place the handset in the charging cradle with the keypad
facing up.
The DSS2455 and DSS2465 series will only work with “AA” Ni-MH
rechargeable batteries. If you use any other type of batteries,
the display will show “Use rechargeable battery only”.
• After installing the batteries in the handset, charge your handset at least 17-20 hours.
2) Make sure the charge LED illuminates. If the LED does not illuminate, check to see that
the AC adapter is plugged in and switch on. Clean the handset and base charge contacts
with a pencil eraser.
During a power cut
or if the AC Adapter
is switched off,
this telephone
will not operate.
UP308BH (DSS2465) ENG OM 1/14/05 11:44 AM Page iv