Filter
Top Products
[ 65 ]
Symptom Suggestion
The handset or the base can’t •Make sure that more than 3 handsets (or 2 handsets when the base is used
join the conversation. for the conference) are not in use.
•When recording a conversation, the 2nd handset (or the base) cannot join
the conversation.
The answering system •Make sure the base unit is plugged in.
does not work. •Make sure that the answering system is turned On.
•Make sure that the message record time is not set to Announce only
(see page 47).
Messages are incomplete. •The incoming messages may be too long. Remind callers to leave a
brief message.
•The memory may be full. Delete some or all of the saved messages.
After a power failure, the •Record your greeting again. The default message should remain.
outgoing message is deleted.
No sound on the base unit •Adjust the speaker volume on the base unit.
speaker during call monitoring •Make sure the call screen feature is set to On.
or message playback.
Cannot access remote call-in •Make sure you are using the correct PIN number.
features from another •Make sure that the touch-tone phone you’re using can transmit the tone
touch-tone phone. for at least two seconds. If it cannot, you may have to use another phone
to access your phone.
Time stamp cannot be heard. •Make sure you have set the time (see “Setting Day and Time” on page 21
or “Setting the Time” on page 45).
If you still have a problem. •Check our web site for the latest information and frequently asked questions.
www.uniden.com.au
www.uniden.co.nz
UP308BH (DSS2465) ENG OM 1/14/05 11:49 AM Page 65