Filter
Top Products
[ 60 ]
Call Transfer Feature
From handset to handset or to the base
1) During a call, press on the handset.
2) Select a handset or the base to transfer the call to
within 10 seconds (refer to step 2 under “From handset
to handset or to the base” in the intercom section).
The call will automatically be placed on hold, and an
intercom tone sounds. To cancel the transfer, press the CANCEL soft key, ,
or the BACK soft key on the initiating handset.
3) On the receiving handset, to answer the page, press , , or the
ANSWER soft key (or or (talk) on the base). Or press any number key,
, or (when Anykey Answer is On), or pick up the handset from the cradle
(when AutoTalk is On). The intercom mode is activated, but the caller is still on hold.
4) To speak to the caller, press or on the receiving handset (or
(talk) on the base).
From the base to a handset
1) During a call, press on the base. The call will automatically be placed
on hold.
2) Select the handset you want to talk with by pressing the number key (1-4). To page all
the handsets press . An intercom tone sounds. To cancel the transfer, press
or (talk) on the base.
3) On the receiving handset, to answer the page, press , , or the
ANSWER soft key. Or press any number key, , or (when Anykey Answer is
On), or pick up the handset from the cradle (when AutoTalk is On). The intercom mode
is activated, but the caller is still on hold.
4) To speak to the caller, press or on the receiving handset
Hold,to transfer
Handset #2
Handset #3
BACK BACK OK
UP308BH (DSS2465) ENG OM 1/14/05 11:49 AM Page 60