Filter
Top Products
[ 30 ]
3) Press the STORE soft key, “Store/Edit Name” appears.
4) Enter the name (up to 16 characters) by using the
number keypad (see the “Steps for Entering Names and
Special Characters” on page 31).
If a name is not required, go to step 5. <No Name>
will be used as the name.
5) Press the OK soft key to store the name,
“Store/Edit No.” appears.
6) Press the number keypad to enter the phone number
(up to 20 digits), press the OK soft key to store
the number.
7) “Distinctive Ring” appears. Press /
▲ or
▼ to move the pointer to one of the Distinctive Ring
options, then press the OK soft key.
8) “Speed Dial” appears. Press / ▲ or ▼
to move the pointer to select the Speed dial
location (10 locations: SPD1-SPD0).
9) Press the OK soft key. You will hear a confirmation
tone and “Done!” appears in the display.
If you choose not to store a “Distinctive Ring”,
simply select the “No Selectn” option.
If you choose not to store the name/number as a Speed
Dial, simply select the “No Selectn” option.
Store/Edit Name
BACK DELETE OK
Movies
Store/Edit No.
DELETE PAUSE OK
8007303456
Distinctive Ring
No Selectn
Flicker
BACK OK
Speed Dial
No Selectn
SPD1:<Empty>
BACK OK
Movies
0800123456789
Flicker /SPD2
BACK DELETE EDIT
• Selecting a speed
dial location where a
number is already
stored, releases the
old number’s speed
dial setting. The new
number will be
stored in the speed
dial location.
• When the memory is
full, you will hear a
beep and “Memory
Full” appears. You
cannot store names
and numbers.
• The pause key counts
as one digit. Pressing
the PAUSE soft key
more than once
increases the length
of the pause between
numbers. Each pause
represents a 2
second delay.
• Distinctive ringing
will only operate if
you subscribe to the
Caller ID service.
UP308BH (DSS2465) ENG OM 1/14/05 11:46 AM Page 30