Filter
Top Products
[ 48 ]
Setting the call screen
You can screen calls when the Call Screen function is set to On.
1) Press six times.
The current Call Screen setting (On or Off) appears on the base.
2) Press /SELECT or /SELECT to choose “” or “”.
3) Press . A confirmation tone sounds, and the system announces the new setting.
You can mute the Call Screen temporarily. When the system is answering, press .
The Call Screen function resumes when the system is no longer in answering mode.
Additionally, to adjust the volume, press /
▲ or ▼.
If you set the answering system to Off, you cannot screen a call.
Screening a call
To screen an incomming call, do the steps as follows:
After the answering system answers, the base speaker will let you hear the calls as
the machine records the message.
To answer the call, press (talk) or pick up the handset from the base (when
AutoTalk is set to On). If the handset is away from the base, press ,
or any number key, , or (when Anykey Answer is set to On). The
answering system will disconnect automatically.
UP308BH (DSS2465) ENG OM 1/14/05 11:48 AM Page 48