Filter
Top Products
iv
Chapter 5 Network Dial-in Access
Dial-In User Setup 5-1
NETServer Dial-In Setup (Overview) 5-2
NETServer Dial-In (Detailed Setup) 5-4
Configuring a Port 5-4
Adding a Network User to the User Table 5-6
IP Remote Access Case Study 5-11
IPX Remote Access Case Study 5-15
Chapter 6 LAN-to-LAN Routing
Setup for NETServer Routing (Overview) 6-1
An Introduction to NETServer Routing 6-4
PAP and CHAP Authentication 6-9
LAN-to-LAN Routing (Detailed Setup) 6-12
Configuring a Port 6-12
Adding a Remote Device to the Location Table 6-14
Adding a Remote Device to the User Table 6-22
LAN-to-LAN Routing Case Study 6-25
Testing the Connection 6-29
Chapter 7 Talking to the Modems
TCP/IP Modem Sharing 7-1
Implementing Security with Host Device Dial Out 7-3
Configuring Modems as UNIX pseudo TTYs 7-4
Modem Initialization Scripts 7-6
Sending AT Commands 7-9
Chapter 8 Packet Filters
Packet Filter Overview 8-1
Adding Packet Fitlers 8-4
Filter Rule Format 8-6
TCP/IP Rules 8-8
TCP and UDP parameters 8-10
Filtering ICMP packets 8-15
IPX Packet Filtering 8-16
SAP Rules 8-18
Editing Packet Filters 8-19