Filter
Top Products
4-14 IP Terminal Server Setup
Users connecting to the info line will be connected directly to a
database application running on VAX1 and will have no other
access to VAX1. Note that since netdata is talking directly to an
application, it will not relay terminal type information to the
host. Instead, it will relay exactly what the application outputs.
set s8 host 192.77.203.3 (VAX1’s IP address)
set s8 service_login netdata 6020
(Connect directly to application at TCP port# 6020)
User Table Setup
User A will be logging in to Sun1 with Rlogin. Since Sun1 is the
port default host, User A needs only a User name, a password,
and a login service in the User Table.
add user UserA password UserAPw
set user UserA service rlogin
User B can log into either SUN1 or VAX1. After he or she types
the correct user name and password, User B will be prompted
for a host name or IP address. User B will use the default login
service, Telnet.
add user UserB password UserBPw
set user UserB host prompt
UserC is a dialback user. When he or she enters the correct user
name and password, the NETServer will hang up and dial the
user back at 9, 555-1000. User C will use the port default host
(Sun 1) and Telnet. Note that the password does not have to be
defined on the same line as the user name.
add user UserC
set user UserC password callmeback
set user UserC dialback 9,555-1000
Save your work and reset all the ports
save all
reset all