Filter
Top Products
U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
Enter 4 at the SNDCP Menu. The PPPoE Menu appears. This menu provides the following
options…
● List PPPoE. Enter 1 at the PPPoE Menu. The List PPPoE Menu appears. This menu
displays configured PPPoE variables.
● Configure PPPoE. Enter 2 at the PPPoE Menu. The Configure PPPoE Menu appears.
This is a two-screen menu. Set these PPPoE variables...
Configure PPPoE, Screen 1 Configure PPPoE, Screen 2
§ Profile ID [0-7] § Restart Time
§ Interface Name [ ppp [0-7] ] § Mode [Auto/Direct]
§ Vpi [0-255] § Idle Timeout
§ Vci [0-65,535] § My IP Address
§ Encapsulation Type [11c/vc] § Peer IP Address
§ User Name § Service Name
§ Password § AC Name
§ Authentication Protocol
[pap/chap/mschapv1/mschapv2]
§ Host Unique Tag [Y/N]
§ MRU [0-1,492] § Ether Address
§ MTU [0-1,492] § Enable Nat [Y/N]
§ § SubnetMask
After you complete your configuration, proceed to the Basic Menu and enter 8. The Save &
Reboot Menu appears. From this menu, save your changes and reboot the router.
• Start PPPoE. Enter 3 at the PPPoE Menu. The Start PPPoE Menu appears. This menu
allows you to start a PPPoE session by entering the session’s profile ID.
• Stop PPPoE. Enter 4 at the PPPoE Menu. The Stop PPPoE Menu appears. This menu
allows you to stop a PPPoE session by providing the session’s profile ID.
• Delete PPPoE. Enter 5 at the PPPoE Menu. The Delete PPPoE Menu appears. This menu
allows you to delete a PPPoE session by entering the session’s profile ID.
• Default PPPoE. Enter 6 at the PPPoE Menu. The Default PPPoE Menu appears. This
menu allows you to make a PPPoE session the default session by providing the session’s
profile ID.
file:///P|/T_WRITER/Documentation/Released/900...9003%20(Guiness)%20prac%20template/tquicks.htm (32 of 42) [11/6/2002 8:58:14 AM]