Filter
Top Products
U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
ENET1 or
ENET 2
Flashing Green or
Orange
Flowing data traffic.
Off Did not establish a physical connection between router and computer.
USB
On Green
Established and detected a physical connection through the USB cable between
router and computer.
Flashing Green Flowing data traffic.
Off Did not establish a physical connection between router and computer.
ADSL
On Green Established a DSL link.
Flashing Green Negotiating a DSL link.
Off The DSL link failed.
Troubleshooting Tips
None of the LEDs illuminates when I turn on the router.
• Check the connection between the power adapter, router, and wall outlet.
• Confirm that you're using the power adapter that came with your U.S. Robotics SureConnect ADSL Ethernet/USB
Router package.
The ADSL light is flashing or is not illuminated.
● Make sure that the telephone cable connects properly at the "ADSL" port on the rear of the router and at the phone
wall jack.
I can't connect to the router's configuration utility.
Possible Solution 1:
● Make sure that your Ethernet or USB cables connect properly and securely.
● Make sure that you've plugged in the power cord.
Possible Solution 2:
● Make sure that your PC is using an IP address within the range of 192.168.1.2 to 192.168.1.254.
● Make sure that the address of the subnet mask is 255.255.255.0.
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/troubles.htm (2 of 7) [11/6/2002 9:02:16 AM]