Filter
Top Products
U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
● If necessary, the Default Gateway data should be at 192.168.1.1.
● To verify these settings, perform the following steps:
Windows 95, 98, or Me Users:
1. Click Windows Start.
2. Click Run.
3. Type winipcfg.
4. Click OK.
5. Check the IP Address, Subnet Mask, Default Gateway data. Is this data correct?
6. If the data isn't correct, click Release All. Then click Renew All.
Windows NT, 2000, or XP Users:
1. Click Windows Start.
2. Click Run.
3. Type cmd.
4. Click OK.
5. At the DOS prompt, type ipconfig/all.
6. Check the IP Address, Subnet Mask, Default Gateway data. Is this data correct?
7. If the data isn't correct...
• Type ipconfig/release.
• Press Enter.
• Type ipconfig/renew.
• Press Enter.
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/troubles.htm (3 of 7) [11/6/2002 9:02:16 AM]