Filter
Top Products
U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
1.25.7 pppoelist
pppoelist [-profile Profile]
Displays the listing of all available free profiles. If -profile is not specified, this command will
display all the valid configured profiles.
1.25.8 pppoedefault
pppoedefault <profile>
Configures the specified profile as the default PPPoE connection. This profile must be using “auto”
mode. Out of all the profiles that are using the “auto” option, only one can be run at a time. This
command is used to specify that profile. If the “pppoedefault” command is not used, the first profile
that used the “auto” option is used as the default.
1.25.9 pppoedel
pppoedel <profile> | all
Deletes the specified profile. Profile is specified as a number (see pppoe command). If all is
specified, then all profiles are deleted. This command only deletes inactive profiles. If a profile is in
use, it must be stopped before it can be deleted.
1.25.10 pppoa
pppoa <profile> -o <-if Interface> <-encap Encapsulation> <-restarttime Timeout
> <-auth Auth> <-myaddr IPAddr> <-peer PeerIPAddr> <-mtu MTU> <-mru MRU>
<-user Username> <-pass Password> <-vpi Vpi> <-vci Vci> <-nat [enable/disable]> <-netmask
mask> <-vpn OUI vpnId>
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (66 of 71) [11/6/2002 8:58:46 AM]