Filter
Top Products
U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
4. Verify that you’ve
selected Multi Mode. (See
Figure 2.)
Figure 2
5. Click the WAN
Setup.
6. Verify that only the
PPPoA configuration
appears on the Current
ATM PVC List. (This is the
list on the bottom of the
screen. See Figure 3.)
7. See the Current
ATM PVC List at the
bottom of the screen. On
this list, verify your
settings for VPI and VCI.
(See Figure 3.)
Figure 3
8. On the Current ATM
PVC List, see “Encap.”
Verify your Encapsulation
Mode settings. (See
Figure 3.)
9. On the Current ATM
PVC List, see “NAT.”
Verify that NAT is “On.”
(See Figure 3.)
10. On the Current ATM
PVC List, verify your ISP-
assigned, PPPoA
username. (See Figure 3.)
11. See the Current ATM
PVC List (Figure 3). Verify
the authentication protocol
that your ISP uses. This
protocol must appear on
the list.
file:///P|/T_WRITER/Documentation/Released/900...%20(Guiness)%20prac%20template/configexamp.htm (14 of 33) [11/6/2002 9:00:35 AM]