Filter
Top Products
U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide
Specifies the version of the RIP protocol that will be used. The permissible values are 1 or 2. The
default is 1.
ver -o <1|2>
1.11.3 list
Lists the routes currently available.
list
Note: For these new values to take effect, the configuration must be saved. The next time the
system is booted, these values will be in effect.
1.12 Bridge
The bridge commands are located in the “bridge” directory.
1.12.1 group
group <interface_name> <interface_name> -o -if <interface_name> -if <interface_name>
Assigns or groups two or more interfaces to the bridge.
interface_name The name of an interface e.g. eth0, eth1 , atm0 ,atm1 etc.
Examples:
bridge group eth0 -o -if eth1 -if usb0 -if atm1
The interfaces eth0, eth1 and usb0 are assigned to the bridge atm1.
bridge group eth0 -o -if atm0
The interfaces eth0, and atm0 are assigned to the bridge.
1.12.2 pvc
file:///P|/T_WRITER/Documentation/Released/9003%20(Guinness)/User%20Guide/9003%20(Guiness)%20prac%20template/cli.htm (24 of 71) [11/6/2002 8:58:45 AM]