Filter
Top Products
26 © 2005 VBrick Systems, Inc.
Script Devices
Script devices work with scripts. Script devices are VBricks, STBs, or non-MPEG-1, 2, or 4
devices (like cameras or VCRs) that are identified in the Portal Server database. Once defined
in the network, they can be subsequently controlled by a script (see Scripts
on page 27) and
launched from ETV Portal Server. A script device must be physically connected to the
network (or to a VBrick or Set-Top Box) and must be available at the runtime of a scheduled
event. Script devices are controlled through a TCPIP port. For example, PTZ cameras
respond to pan, tilt, and zoom commands; these commands can be scripted and executed
from ETV Portal Server.
T To add a Script Device configuration:
1. Go to
Global Settings > Script Devices.
Record Path Path and folder where all recording are stored. By default, recordings
are stored on the D: drive. If you install ETV Portal Server on a
system without a D: drive, you must change the path. Also, in order to
record multiple streams, the Record Path must be under FTP root. For
example, if root is
C:\Inetpub\ftproot the Record Path must be
C:\Inetpub\ftproot\<your_folder>
Max. Recording The default number of concurrent recording sessions allowed is 2. If
you exceed 2, you must purchase a record license. Without a license,
any attempt to record more than 2 concurrent sessions will fail.
FTP User Name FTP user name in operating system of Recorder server.
FTP Password FTP password in operating system of Recorder server.
Confirm Password FTP password in operating system of Recorder server.