Filter
Top Products
Configuring for SSL
ETV Portal Server Administrator Guide 63
5. Click Server Certificate to launch the Web Server Certificate Wizard
6. Click
Process the pending request and install the certificate and then click Next.
7. Enter the path and file name of the file that contains the response from the CA, and then
click
Next.
8. Examine the certificate overview, click
Next, and then click Finish.
A certificate is now installed on the ETV Portal Server web server.
Configure Resources for SSL
After installing the certificate on the ETV Portal Server web server, the ETV Portal Server
can now be configured to require SSL access.
T To configure ETV Portal Server for SSL access:
1. Start Internet Information Services, if it's not already running.
2. Right click on
Default Web site. Select Properties.
3. Go to the
Directory Security tab.
4. Under
Secure communications, click Edit.
If the
Edit button is not available, the certificate may not have been installed correctly. Go
back to Install the Certificate on the ETV Portal Server web server section, and verify
that the certificate is installed.
5. Click
Require secure channel (SSL) check box.
6. Client's browsing to file must now use HTTPS protocol.
7. Click
OK, and then click OK again to close the Properties dialog box.
8. Alternatively, if only the Logon pages and the admin pages need to be secured, right-click
the following files, one at a time, and then click
Properties.
Login.aspx (Select File Security rather than Directory Security)
Admin
9. Repeat Steps 3–6 for both files for all required ETV Portal Server resources configured.
10. Close
Internet Information Services.