Filter
Top Products
34 © 2005 VBrick Systems, Inc.
4. Configure Advanced Settings for VBricks and STBs as necessary. As noted, it is unlikely
you will ever need to change these settings. In all cases you can safely ignore these settings
and use the defaults provided by ETV Portal Server.
These settings generally set configuration options for source devices and destination
devices (VBricks and STBs) so that they are configured properly (e.g. transmit/receive
enabled/disabled) at the beginning and end of an emergency broadcast. All required
devices must be present and enabled for a successful emergency broadcast. The settings
differ depending on the device (e.g. MPEG-2 or -MPEG-4) you select and will include
some or all of the fields shown in the table below.
Stored Broadcast
• VoD Name – Select an NXG server and a source video. Then
select the destination VBricks or STBs.
• VBrick Name – Select a VBrick (or VBStar) and a source video.
Then select the destination VBricks or STBs.