Filter
Top Products
ViewSonic PJ502 13
Remote control
Putting Batteries
1. Remove the battery cover.
Slide back and remove the battery cover in the direction of the arrow.
2. Insert the batteries.
Align and insert the two AA batteries according to their plus and minus terminals as indi-
cated in the remote control.
3. Close the battery cover.
Replace the battery cover in the direction of the arrow and snap it back into place.
WARNING
X Always handle the batteries with care and use them only as directed. Improper use
may result in battery explosion, cracking or leakage, which could result in fire, injury and/
or pollution of the surrounding environment.
* Be sure to use only the batteries specified. Do not use batteries of different types at the
same time. Do not mix a new battery with used one.
* Make sure the plus and minus terminals are correctly aligned when loading a battery.
* Keep a battery away from children and pets.
* Do not recharge, short circuit, solder or disassemble a battery.
* Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry play.
* If you observe a leakage of a battery, wipe out the vesidue and then replace a battery.
If the vesidue adheres your body or clothes, rinse well with water immediately.