ViewSonic A-CD-PJ502 Projector User Manual


 
ViewSonic PJ502 40
Warranty and after-service
If a problem occurs with the equipment, first refer to the “Troubleshooting” and run through
the suggested checks. If this does not resolve the problem, please contact your dealer or the
service company. They will tell you what warranty condition is applied.
Specifications
NOTE • This specifications are subject to change without notice.
Item Specification
Product Name Liquid crystal projector
Liquid
Crystal
panel
Panel size 1.8 cm (0.7 type)
Drive system TFT active matrix
Pixels 480,000 pixels (800 horizontal x 600 vertical)
Lens Zoom lens F=1.7 ~ 1.9 f=21.8 ~ 26.2 mm
Lamp 165W UHB
Power Supply AC100-120V/2.7A, AC220-240V/1.5A
Power Consumption 240W
Temperature range 5 ~ 35°C (Operating)
Size 297 (W) x 65 (H) x 233 (D) mm (Not including protruding parts)
Please refer to the following figure.
Weight (mass) 2.45 kg
Ports
Optional
Parts
Lamp PRJ-RLC-015
Air filter Please contact your dealer or ViewSonic
Others Please contact your dealer or ViewSonic
RGB ...D-sub 15pin mini x1
COMPONENT VIDEO
Y........................... RCA x 1
Cb/Pb ................... RCA x 1
Cr/Pr..................... RCA x 1
S-VIDEO ..........S-video x1
VIDEO.................. RCA x1
AUDIO........Stereo mini x1
Communication port:
CONTROL
.................. D-sub 9 pin x1