Filter
Top Products
ViewSonic PJ502 21
EASY MENU
With the EASY MENU, items shown in the table below can be performed.
Select an item using the menu cursor buttons S/T, and press the menu
cursor button X or the ENTER button on the remote control to progress.
Then perform it referring to the following table.
Item Description
ASPECT Using the buttons W/X switches the mode for aspect ratio.
See the item ASPECT of section IMAGE menu.
KEYSTONE Using the buttons W/X corrects the keystone distortion.
See the item KEYSTONE of section SETUP menu.
MODE Using the buttons W/X switches the mode of picture type.
The modes of picture type are combinations of a mode of GAMMA and a mode of
COLOR TEMP. Choose a suitable mode according to the projected source.
NORMAL
CINEMA DYNAMIC
NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)
DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)
* When the combination of GAMMA and COLOR TEMP differs from pre-assigned
modes above, the display on the menu for the MODE is “CUSTOM”. Please refer
to the items GAMMA and COLOR TEMP of PICTURE menu.
BRIGHT Using the buttons W/X adjusts the brightness.
See the item BRIGHT of section PICTURE menu.
CONTRAST Using the buttons W/X adjusts the contrast.
See the item CONTRAST of section PICTURE menu.
COLOR Using the buttons W/X adjusts the strength of whole color.
See the item COLOR of section PICTURE menu.
TINT Using the buttons W/X adjusts the tint.
See the item TINT of section PICTURE menu.
SHRPNESS Using the buttons W/X adjusts the sharpness.
See the item SHARPNESS of section PICTURE menu.
WHISPER Using the buttons W/X turns off/on the whisper mode.
See the item WHISPER of section SETUP menu.
MIRROR Using the buttons W/X switches the mode for mirror status.
See the item MIRROR of section SETUP menu.
RESET
Performing this item resets all of the items of EASY MENU except, FILTER TIME
and LANGUAGE.
A dialog is displayed to make sure. Selecting RESET using the button
S performs
reset.
FILTER TIME
Performing this item resets the filter timer (it counts use time of air filter).
A dialog is displayed to make sure. Selecting RESET using the button
S performs
reset. (The same as the item FILTER TIME of OPTION menu.)
LANGUAGE
Select the LANGUAGE to toggle the menu language. Refer to description of LAN-
GUAGE in the SCREEN menu.
Go To
Advanced
Menu
Select the “Go To Advanced Menu” to use the menu of PICTURE, IMAGE, INPUT,
SETUP, SCREEN or OPTION.