Filter
Top Products
ViewSonic PJ502 18
At a COMPONENT VIDEO, S-VIDEO or VIDEO signal
The video format best suited for the respective input signal will be selected automatically.
This function is available only when the AUTO mode is selected to the item VIDEO FOR-
MAT of INPUT menu. For a component video signal, the signal type is automatically iden-
tified independently of this function.
* The automatic adjustment operation requires approximately 10 seconds. Also please
note that it may not function correctly with some input.
Adjusting the position
1. Press the POSITION button on the remote control.
The “POSITION” indication will appear on the screen.
2. Use the menu cursor buttons S/T/W/X to adjust the picture position.
When you want to reset the operation, press the RESET button on the remote control dur-
ing the operation.
To complete this operation, press the POSITION button again.
Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
* This function is available only for RGB input.
Correcting the keystone distortions
1 Press the KEYSTONE button on the remote control.
A dialog will appear on the screen to aid you in correcting the distortion.
2. Use the menu cursor buttons S/T to correct the distortion.
To close the dialog and complete this operation, press the KEYSTONE button again.
Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
* This function may not be work well with some input.
* The adjustable range for correcting will vary among inputs.
Using the magnify feature
1. Press the ON button of MAGNIFY on the remote control.
The “MAGNIFY” indication will appear on the screen, and the projector will enter the
MAGNIFY mode.