Filter
Top Products
ViewSonic PJ502 28
MyScreen
This item functions for capturing the MyScreen of the blank screen and the start
up screen. Please execute displaying the input including the picture you want to
capture.
1. Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start
capturing the picture from the current screen.
Please wait for the target picture to be displayed, and press the ENTER button
on the remote control when the picture is display. The picture will freeze and
the frame for capturing appears.
To stop performing, press the RESET or ESC button on the remote control.
2. Using the buttons
W
/
X
/S/T adjust the frame position. Please move the frame
to the position of the picture which you want to use.
To start registration, press the ENTER button on the remote control.
To restore the screen and return to the previous dialog, press the RESET or
ESC button on the remote control.
Registration takes about two minutes. When the registration is completed, the reg-
istered screen and the message “MyScreen registration is finished.” are displayed
for several seconds.
If the registration failed, the message “A capturing error has occurred. Please try
again.” is displayed.
MyScreen
Lock
Using the buttons S/T turns on/off the MyScreen lock function.
TURN ON
TURN OFF
When the TURN ON is selected, the item MyScreen cannot be performed. Use
this function for protecting the current MyScreen.
MESSAGE Using the buttons S/T turns on/off the message function.
TURN ON
TURN OFF
When the TURN ON is selected, the following message function works.
“AUTO IN PROGRESS” while automatically adjusting
“NO INPUT IS DETECTED”
“SYNC IS OUT OF RANGE”
“Detecting....” while searching for the input
The indication of the input signal by changing
The indication of the aspect ration by changing