Filter
Top Products
ViewSonic PJ502 29
OPTION menu
With the OPTION menu, items shown in the table below can be per-
formed.
Select an item using the menu cursor buttons S/T. And press the menu
cursor button
X
or the ENTER button on the remote control to progress,
except for the items LAMP TIME and FILTER TIME. Then perform it re-
ferring to the following table.
Item Description
SEARCH Using the buttons S/T turns on/off the message function.
TURN ON
TURN OFF
When the TURN ON is selected, detecting no signal automatically cycles through
input ports in order of following. Then when an input is found, the projector will
stop searching and display the image. If no signal is found, the projector will return
to the state before the operation.
AUTO OFF Using the buttons S/T adjusts the time to count down to automatically turn the
projector off.
Long (max. 99 minutes)
Q Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with a proper signal
(without no-signal and an unsuitable signal) reaches at the set time, the projector
lamp will go off and the power indicator begins blinking. Please refer to the section
“Turning off the power”.
AUTO ON Using the buttons S/T turns on/off the message function.
TURN ON
TURN OFF
When the TURN ON is selected, you can turn the projector on without pressing
the STANDBY/ON button. Please refer to the section “Turning on the power”. If 5
minutes passed with no signals or no keys the projector will go off.
LAMP TIME
The lamp time is the time counted after the last resetting. It is shown in the
OPTION menu as the use time of the lamp.
Pressing the RESET button on the remote control for about 3 second displays a
dialog. To reset the lamp time, select the RESET using the button
S.
RESET
CANCEL
* Please reset the lamp time only when you replace the lamp, for correct mes-
sages about the lamp.
* About the lamp replacement, please see the section Lamp.
FILTER TIME
The filter time is the time counted after the last resetting. It is shown in the
OPTION menu as the use time of the air filter.
Pressing the RESET button on the remote control for about 3 seconds displays a
dialog. To reset the filter time, select the RESET using the button
S.
RESET
CANCEL
* Please reset the filter time only when you clean or replace the air filter, for correct
messages about the air filter.
* About the caring the sir filter, please see the section Air filter.