Filter
Top Products
ViewSonic PJ502 5
Setting up
WARNING
X Place the projector in a stable position horizontally. A fall or a turnover could cause an
injury and/or damage to the projector. Then using a damaged projector could result in a
fire and/or an electric shock.
* Don't place the projector on an unstable, slanted or vibrating surface such as a wobbly
or inclined stand.
* Do not place the projector in the side/front/rear-up position, except for care of the air
filter.
* For the projector installed bottom-up, use the accessory filter cover for bottom-up use.
And in the case of a ceiling installation or the like, contact your dealer before installation.
X Place the projector in a cool place, and pay attention enough to ventilation. The high
temperature of the projector could cause a fire, a burn and/or malfunction to the projector.
* Don't stop up, block and cover the projector's vents.
* Keep a space of 30 cm or more between the sides and other objects such as walls.
* Don't place the projector on a metallic thing or anything weak in heat.
* Don't place the projector on a carpet, cushion or bedding.
* Don't place the projector in direct sunlight or near a hot object such as heater.
* Put nothing about lens and vents of the projector. Put nothing on the projector.
* Put nothing that is sucked or sticks to the bottom of projector. This projector also has
additional intake vents also on the bottom.
X Do not place the projector on the place that gets wet. Damping the projector or inserting
liquid in the projector could cause a fire, an electric shock and/or malfunction to the pro-
jector.
* Don't place the projector in a bathroom or the outdoors.
* Put nothing containing the liquid near the projector.
CAUTION
X Avoid a smoky, humid or dusty place. Placing the projector in such place could cause
a fire, an electric shock and/or malfunction to the projector.
* Don't place the projector near a humidifier, a smoking space or a kitchen.
* Put nothing containing the liquid near the projector.