Filter
Top Products
BEFORE YOU BEGIN 5
Installation
Installation is a quick, four-step process:
1. Assemble the scanner
2. Install the software
3. Connect the power supply
4. Connect the USB cable and turn on the power
BEFORE YOU BEGIN
Please make sure of the following before you begin installation:
■ The information in this guide may cover software not provided with
the scanner you purchased. Disregard any information about the
software not applicable to your scanner. Please visit our web site at
www.visioneer.com for the latest software updates for your Visioneer
Patriot 480 scanner.
■ If your computer has AntiVirus or AntiSpyware software running,
you may see messages during installation asking you to allow the
installation to proceed. The messages will differ based on the
software your computer is running, but in each case allow the
installation to proceed. Alternatively, you can turn off the AntiVirus
or AntiSpyware software before installing your scanner. But if you
do, make sure to turn it back on again when installation is finished.
■ If you already have a scanner connected to your computer, you need
to remove its driver programs first before beginning the installation
of your Visioneer Patriot 480 scanner. Please see the User’s Guide
that you received with your other scanner for specific instructions.
■ If your computer is running Windows Vista, you may see the Vista
User Account Control screen asking you to confirm system changes.
Click the Continue button to allow the installation to proceed.