Filter
Top Products
11
R E A R V I E W
Stand Adjustment Lever
Pull this lever to adjust the stand.
Release the lever to lock the stand
in place.
Be careful to avoid
catching your finger in
the gap of the movable
portion of the stand.
CAUTION
Connector Panel Cover
To remove the cover, slide it
to the right.
Stand
The stand can be used to
adjust the tilt angle of the
unit from a low position
(18° from horizontal) to a
high position (73° from
horizontal).
Important:
Be sure to adjust the tilt angle of the stand to the low tilt
position before packaging Cintiq. If you do not close the stand, the notched
mechanism may be damaged during transportation and storage. Do not lift
the unit by the stand; this may damage the stand mechanism. When lifting
or moving Cintiq, always do so by grasping the main body casing.
Digital/Analog (DVI/VGA) Switch
Use this switch to correctly set Cintiq for
the video connection you will be using.
Next Step: Installation. See page 12