Wacom 15X Projector Accessories User Manual


 
42
U S I N G A N A L T E R N A T E M O U N T O R S T A N D
If you will be using Cintiq in an installa-
tion that requires the use of an alternate
mounting platform, you can remove the
adjustable stand from the unit and
mount the pen display onto a VESA con-
forming mount arm or stand.
A VESA mounting platform will require
mount screws that are 4 mm wide with a
0.7 mm pitch (M4 Regular), and a maxi-
mum screw clearance depth of 15 mm.
Exceeding the clearance depth of 15 mm
will damage Cintiq internal components.
To remove the adjustable stand and
attach Cintiq to a different mounting
platform:
1. Turn off your computer and power
off Cintiq. Then disconnect all
cables from the unit.
2. Protect the display screen surface by
spreading a soft cloth onto a flat
table and placing Cintiq face down
on the cloth.
3. Remove the four screws and lift the
adjustable stand assembly away from
the body of the unit.
4. Using the appropriate screws for
your mounting platform, firmly at-
tach Cintiq to the alternate mounting
platform.
5. Refer to the appropriate installation
instructions, beginning on page 12,
and reattach the cabling.
When attaching Cintiq onto an alternate
mounting platform, be sure to follow all
instructions in the documentation supplied
by the platform manufacturer. If improp-
erly installed, the unit could fall, resulting
in damage to the unit or physical injury.
CAUTION