Filter
Top Products
7-1
7. The Status Screens
The APS-8M Status Screens display the connection status and communication
parameters for the RS-232 ports. Basically, There are four different status
screens; The Port Status screen (/S), the Port Diagnostics screen (/SD), the Port
Parameters screens (/W), and the View Password Directory screen.
7.1. The Port Status Screen (/S)
The Port Status Screen lists the general status of the RS-232 ports. To display
the Port Status Screen, access the command mode and type /S [Enter], the
screen will appear as shown in Figure 7.1.
Although the Port Status Screen can be displayed by passwords that permit
Supervisor Mode and passwords that do not permit Supervisor Mode, note
that the resulting screen will appear slightly different, depending upon the
Supervisor Mode access rights of the port and password that invoked the /S
command. When the /S command is invoked by a user who does not have
access to Supervisor Mode, the Port Status Screen will only display the status
of those ports that are specifically allowed for the password entered at log in.
PORT STATUS: APS-M, Version 3.0, Site ID: (undefined)
PORT | NAME | CMD ACCESS | STATUS | MODE | BUFFER COUNT
-----+------------------+------------+--------+--------+--------------
01 | (undefined) | Unlocked | Free | Any | 0
02 | (undefined) | Unlocked | Free | Any | 0
03 | (undefined) | Unlocked | Free | Any | 0
04 | (undefined) | Unlocked | Free | Any | 0
05 | (undefined) | Unlocked | Free | Any | 0
06 | (undefined) | Unlocked | Free | Any | 0
07 | (undefined) | Unlocked | Free | Any | 0
08 | Internal_Modem | Unlocked | Free | Modem | 0
Enter /H for command menu.
APS>
Figure 7.1: The Port Status Screen