Filter
Top Products
11-7
Command Reference Guide
/F Set System Parameters
Displays a menu which is used to define the Site ID message and other global
parameters. Also allows access to the "Add Password" function. For more
information, please refer to Section 5.4.
Availability: Supervisor Mode Only
Format: /F [Enter]
Response: Displays System Parameters Menu
/H Help
Displays a Help Screen, which lists all APS-8M commands along with a brief
description of each command.
Availability: Supervisor Mode / Non-Supervisor Mode
Format: /H [Enter]
Response: Displays Help Screen. Note that the Supervisor Mode Help Screen
differs from the Non-Supervisor Mode Help Screen.
/I Default and Test
Tests internal memory and initializes the unit with the default parameters
specified by the SetUp Switches.
CAUTION: When /I is invoked, the APS will revert to the
parameters specified by the SetUp Switches. Command selected
parameters will be lost.
Availability:
Supervisor Mode Only
Format: /I[/Y] [Enter]
Where /Y is a command option used to suppress the "Sure?" prompt.
Response:
Verbose: "Are You Sure (y/n)?", if Y, memory test and initialization begins.
Terse: 5, if Y, memory test and initialization begins.
/J Display Site ID
Displays the user-defined Site I.D. message.
Availability: Supervisor Mode / Non-Supervisor Mode
Format: /J [Enter]
Response: Displays Site I.D. Message