Filter
Top Products
Syntax %%IncludeFeature:lfiscrlf
(value)
Purpose Controls the default line termination mode (the
<ESC>&k#G
command); specifies the line termination treatment of a linefeed.
Variable
value
Purpose Specifies whether a linefeed is treated simply as a
linefeed or as a carriage return-linefeed combination
Range Off/false
—Treats linefeed as a linefeed.
On/true
—Treats linefeed as carriage return-linefeed
combination
Default Printer configuration dependent
Format boolean
Notes The result of various settings for these parameters is
shown in the table included in the Set Carriage
Return (Line Termination) discussion, in terms of the
equivalent code passed to the PCL line termination
command. The second setting (lfiscrlf on, criscrlf off)
is correct for most ASCII listings printed from UNIX
machines. PC listings should usually be done with
both items set to Off, and Macintosh listings usually
require the third setting (lfiscrlf Off, criscrlf On). Note
that the FF becomes a CR-FF when the LF is a CR-
LF.
Syntax %%IncludeFeature:linesperinch
(#)
Purpose Sets the default PCL line spacing.
Notes Both the %%IncludeFeature:linesperinch and the obsolete
%%IncludeFeature:linesperpage commands affect PCL’s
default VMI (vertical motion index). In the event that both are
specified, the linesperpage command is ignored.
Variable
#
Purpose Specifies the default number of lines per inch.
Range 1-48