There are two types of two-sided printing: duplex and tumble duplex.
The illustration below shows the difference between these two types.
Once the optional duplex printing module is installed on your printer,
the Duplex option and Tumble Duplex option appear in the Operator
Control menu. See chapter 3, “Operator Control Menu,” in the system
administrator’s guide for more information on these two options. Use
your application top choose duplexing on a per job basis or the con-
trol panel to set duplexing as the default. To select duplex printing
through the control panel, follow these steps:
1 Press the Online/Offline key to take the printer off line.
The indicator light by the key goes out and the message window
continues to display
IDLE
or
ENERGY SAVER
2 Press the Menu key to enter the configuration menu.
The message window displays
CONFIGURATION
OPERATOR CONTROL
Landscape
Portrait
Landscape
Portrait
DUPLEX
TUMBLE DUPLEX
Side 1
Side 2
Side 1
Side 2
Side 1
Side 2
Side 1 Side 2