Filter
Top Products
Print Setup
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
165
Print Setup
1. Press Machine Status on the control panel.
2. Press the up/down arrows to highlight Print Setup and press OK. If necessary, enter the
Administrator’s Password using the keypad. Refer to Accessing the Setup Options on page 154 for
instructions.
The following Print Setup options and settings are available:
Note: * indicates the factory default setting.
3. Press the up/down arrows to highlight the option required and press OK.
4. Press the up/down arrows to highlight the setting required and press OK to save the selection.
5. Continue customizing the Print Defaults as required, then press Stop to return to Ready mode.
Option Description Setting
Orientation Selects the direction in which information is printed on
the page. Portrait is printed on the long edge vertically
and Landscape horizontally.
• Portrait *
•Landscape
Quantity Sets the default quantity.
•Default setting
1-999
1 *
Resolution Sets the dots per inch. The higher the resolution, the
sharper the printed image.
• 600 dpi-Normal
• 1200 dpi-Best
Darkness Lightens or darkens the print on the page. • Normal *
•Light
•Dark
Darken Text Prints text darker than on a normal document. •Off *
•Lighter
• Normal
•Darker
Emulation Sets the emulation type and option.
•Emulation Type
•Setup