Filter
Top Products
System Setup
Xerox WorkCentre 3315DN/3325DN/3325DNI
User Guide
171
Default Paper Size Use this option to set the default
size of paper.
•Letter *
•A4
Power Save Use this option to set the time
the machine waits before
entering Power Save mode.
•1 min *
•5 Min
•10 Min
•15 Min
•20 Min
•30 Min
• 45 Min
•60 Min
•120 Min
Wakeup Event Use this option to determine
what ‘wakes’ the machine up
from Power Save mode.
Xerox WorkCentre 3315
• Button Press On / Off*
• Scanner On* / Off
•Printer On / Off*
Xerox WorkCentre 3325
• Button Press On / Off*
• Scanner On / Off*
•Printer On / Off*
System Timeout Sets the elapsed time before the
machine reverts to default
settings.
•15 Sec
•30 Sec *
•60 Sec
•120 Sec
•180 Sec
Job Timeout Sets the elapsed time before the
printing the last page of a print
job that does not end with a
command to print the page.
• (15-300 sec) 15 *
Configuration Page Enables a report detailing all the
machine settings to be printed.
•On *
•Off
Altitude Adjustment The xerographic process used in
your machine to make prints is
affected by air pressure. Air
pressure is determined by the
height of the machine above sea
level. The machine will
automatically compensate for
differences in air pressure if you
enable the feature.
• Normal *
• High 1
• High 2
• High 3
Auto Continue Determines whether or not the
machine continues printing
when it detects the paper does
not match the paper settings.
•On *
•Off
Line Termination Sets the default line termination. •LF *
•LF+CR
Option Description Settings